Test Signal Submenu; Camera Id Submenu - Bosch EX65 Instruction Manual

34 en | Operation
Item
Bilinx Comms.
Camera buttons
Cable compensation Off, Default,
Compensation level
EXIT
8.5.6

Test signal submenu

Item
Show camera ID Off, On
Test pattern
EXIT
8.5.7

Camera ID submenu

Item
Camera ID
Display ID pos.
Camera ID
border
MAC address
F.01U.412.061 | 2.0 | 2011.08
Selection Description
On, Off If Off, Bilinx communications is disabled.
Enable, Enable or disable the camera buttons from working.
disable
Cable compensation is used to avoid the need for
RG59, RG6, amplifiers in long distance coaxial connections up to
Coax12 1000 m (3000 ft). For optimum results select the
coaxial cable type used or, if unknown, select default.
0,1,2 . . .+15 Sets the level of cable compensation
Returns to Install menu.
Selection Description
Select On to overlay the camera ID on the video test
signal.
Color bars 100%, Select the desired test pattern to help installation
Grayscale 11-step, and fault-finding.
Sawtooth 2H,
Checker board,
Cross hatch,
UV plane
Returns to Install menu.
Selection Description
Enter a 17-character camera name. Use Left/Right to
change position in the string; use up/down to select
character. Use Select to exit.
Off, Top left, Select the screen position of the camera ID.
Top right,
Bottom left,
Bottom right
On, Off Displays a grey border behind the camera ID to make it
easier to read.
Shows MAC address (factory set, cannot be changed).
Instruction Manual
EX65 Explosion-protected Camera
Bosch Security Systems, Inc.