Install Menu; Camera Id Submenu - Bosch VG5 100 Series User Manual

AutoDome 100 Series Fixed Camera
4.3.1

Install Menu

Function
CAMERA ID
SET FOCUS NOW
COMM
SYNC
DEFAULTS
EXIT
NOTICE!
When using Bilinx control, the COMM ON/OFF menu selection is not active. This function can
be accessed only through the camera menu keys when the CTFID software is not actively
running.
4.3.2

CAMERA ID Submenu

Function
CAMERA ID
ID POS
EXIT
Bosch Security Systems, Inc.
Selections
Selects submenu Accesses the Camera ID submenu.
ON, OFF
Selects submenu
Selects submenu
Selections Description
Selects submenu To enter up to a 17-character camera name:
– Press the Menu Select key to enter the Camera ID
string.
– Enter up to a 17-character string name for the camera.
– Use the Up and Down keys to select a character.
– Use the Left and Right keys to change position in the
string.
– Press the Menu Select key to save and to exit the
character string.
– Exit the Camera ID menu.
OFF, TOP, BOT Use left or right keys to select:
OFF: Camera ID not displayed.
TOP: Camera ID displayed at upper left corner of display.
BOT: Camera ID displayed at lower left corner of display.
(The camera ID is not displayed when the OSD menu is
open.)
Returns to the INSTALL menu.
User Manual
Description
Completely opens the lens iris for best focus. The
recommended focus procedure is:
– Unlock the focus locking screw.
– From the INSTALL menu highlight SET FOCUS
NOW.
– Turn the lens focus adjustment as required
– Tighten the lens focus locking screw.
– Exit the menu selection.
Turns on Bilinx communication. See notice below.
Accesses the synchronization functions.
Returns all settings for all modes to their default.
Exits this menu.
Advanced Setup | en 13
F.01U.216.346 | 1.0 | 2011.04