Kenwood NX-800 Service Manual page 56

NX-800
Item
Panel tuning mode
12.Single Tone 1) Adj item:[An TONE]
Deviation Adjust:[****]
(2TONE Deviation meter
deviation LPF : 15kHz
adjust) HPF : OFF
adjust *4 PTT : ON
Press [ ] key to store
[Narrow] the adjustment value.
[Wide] 1) Adj item:[Aw TONE]
Adjust:[****]
PTT : ON
Press [ ] key to store
the adjustment value.
13.MSK 1) Adj item:[An MSK]
Deviation Adjust:[****]
adjust *4 Deviation meter
LPF : 15kHz
[Narrow] HPF : OFF
PTT : ON
Press [ ] key to store
the adjustment value.
[Wide] 1) Adj item:[Aw MSK]
Adjust:[****]
PTT : ON
Press [ ] key to store
the adjustment value.
14.CWID 1) Adj item:[Nv CWID]
Deviation Adjust:[****]
adjust *4 Deviation meter
LPF : 3kHz
[Very Narrow] HPF : OFF
PTT : ON
Press [ ] key to store
the adjustment value.
*4: Refer to the "Mode, Signaling, Necessary adjustment and order" table on page 57.
56
ADJUSTMENT
Condition
Test-
PC test mode
equipment
1) Adj item:[Single Tone Deviation
Deviation (Narrow)] meter
Deviation meter Oscilloscope
LPF : 15kHz
HPF : OFF
PTT : Press [Transmit]
button.
Press [Apply] button to
store the adjustment value.
1) Adj item:[Single Tone
Deviation (Wide)]
PTT : Press [Transmit]
button.
Press [Apply] button to
store the adjustment value.
1) Adj item:[MSK
Deviation (Narrow)]
Deviation meter
LPF : 15kHz
HPF : OFF
PTT : Press [Transmit]
button.
Press [Apply] button to
store the adjustment value.
1) Adj item:[MSK
Deviation (Wide)]
PTT : Press [Transmit]
button.
Press [Apply] button to
store the adjustment value.
1) Adj item:[CWID
Deviation]
Deviation meter
LPF : 3kHz
HPF : OFF
PTT : Press [Transmit]
button.
Press [Apply] button to
store the adjustment value.
Measurement
Unit Terminal Unit
ANT [Panel
tuning
mode]
[
[PC test
mode]
[ ],[ ]
Adjustment
Specifications/
Parts Method
Write the value as 1.40~1.60kHz
followings.
513 (Reference
],[ ] value)
2.90~3.10kHz
Write the value as 1.40~1.60kHz
followings.
513 (Reference
value)
2.90~3.10kHz
Write the value as 0.90~1.10kHz
followings.
375 (Reference
value)
Remarks