Panasonic FP-D355 User Manual page 67

Troubleshooting
Check
Error indication/message will be displayed on the control panel of the printer.
PCL error or print overrun
Memory Overflow
Parallel I/0 error
Inappropriate PDL
E5-15
Others
The print of the photograph is not good.
It takes long time to print.
Although print data is transferred to the
digital copier, it does not print.
The print stops in the middle of the run.
HDD unformatted error message appears
on the control panel.
If the measures outlined above do not solve the problem, call Service.
Try to print from the application
again.
Install the additional printer memory.
Check parallel interface connection.
Make sure you select the printer driver
correctly "Panasonic FP-D###"
Take the printer Off-line and press the
reset key. (See P
# Select 600 dpi resolution.
$ Switch off the smoothing function.
# Select 300 dpi resolution.
$ When the print of the first page is slow,
cancel the power save mode of the
digital copier.
Make sure the Printer is on-line.
# Check if there is any problem on the
network.
$ Select longer time out setting of the
network application.
Hard disk (HDD) spooler option
is not formatted. Format the disk and
necessary setting using user preset mode
(See P .34)
68
Action
.6)