Table of Contents
Advertisement
DVAS | Instruction Manual | RAID Menu
8.2 Add Volume
To add a volume, you must have an array create free
space available. To create an array, first click the radio
button of the array, from the top of the page.
Figure 29 Creating a Volume
Once the array has been selected, scroll to view the
amount of space available for each array. With this
knowledge, use the following information to define
the volume parameters.
Enter the Name for the New Volume
Enter the Size of the New Volume in
Megabytes (MB)
Defines the size of the new volume in Megabytes.
Reserve an Optional Free Space Area at
Beginning of the New Volume for Future
Expansion of a Previous Volume
Defines the amount of free space to be reserved
for expansion of the previous volume.
Select Logical Unit Number (LUN) for New
Volume on Host 0/1
Defines the LUN for each volume on either or
both Host Channels. Use the drop down menu
to select each LUN.
A specified LUN can only be accessed by one DVR.
To confirm your choices click Create Volume.
Bosch Security Systems | 20 January 2004
8.3 Expand Volume
To expand the capacity of a volume, a volume must
have been created, with free space available before the
beginning of the next volume. If you only have a
volume with free space, this is acceptable.
Figure 30 Expanding a Volume
Enter the amount of MB to expand the volume by.
Click Expand Volume to advance to the confirmation
page. Select the check box, then click Confirm
Expand Command to continue.
8.4 Delete Volume
Deleting a volume destroys all data on the volume.
Use this command only if you are sure you wish to
delete this information.
Figure 31 Deleting a Volume
Check the box of the volume to be deleted, then click
Delete Volume to continue. Confirm by selecting the
check box, then click Confirm Delete Command.
EN | 28
Advertisement
Table of Contents
