Table of Contents
Advertisement
Bosch Video Management System
–
–
–
In addition, for sequences displayed on an analog monitor via a decoder, DiBos cameras
cannot be displayed.
Notice!
When the configuration is changed and activated, a camera sequence (pre-configured or auto-
matic) usually is continued after restart of the Operator Client.
But in the following cases the sequence is not continued:
i
A monitor where the sequence is configured to be displayed has been removed.
The mode of a monitor (single/quad view) where the sequence is configured to be displayed
has been changed.
The logical number of a monitor where the sequence is configured to be displayed is
changed.
To start and control a camera sequence:
1.
2.
5.7
Starting an automatic camera sequence
Main window
With a camera sequence, a group of cameras are displayed one after the other.
You configure the dwell time for these sequences in the Options dialog box (Extras menu,
Options... command).
Under the following conditions, a sequence is not being displayed:
–
–
–
–
In addition, for sequences displayed on an analog monitor via a decoder, DiBos cameras
cannot be displayed.
Notice!
When the configuration is changed and activated, a camera sequence (pre-configured or auto-
matic) usually is continued after restart of the Operator Client.
But in the following cases the sequence is not continued:
i
A monitor where the sequence is configured to be displayed has been removed.
The mode of a monitor (single/quad view) where the sequence is configured to be displayed
has been changed.
The logical number of a monitor where the sequence is configured to be displayed is
changed.
To start a camera sequence:
1.
Bosch Sicherheitssysteme GmbH
Connection to the camera lost
No permission to display the camera
Camera not configured
Drag the required sequence
The sequence is displayed indicated by the
Click a playback control icon of the Image window toolbar to control the sequence.
Video loss
Connection to the camera lost
No permission to display the camera
Camera not configured
Select an Image pane where you want the sequence to be played.
from the Logical Tree window to an Image pane.
symbol.
Operator's Manual
Displaying camera images | en
2012.07 | V1 | Operation Client
13
Advertisement
Table of Contents
