Table of Contents
Advertisement
Bosch Video Management System
10.2.3
Displaying cameras
Enter a numeric command to display the camera with this logical number in the active Image
pane or analog monitor.
To display cameras of an Enterprise System, select the Management Server where these
cameras are configured.
Toggling between analog mode and workstation mode
4
Displaying a camera in a computer monitor
1.
2.
3.
Selecting a Management Server of an Enterprise System:
1.
2.
Displaying a camera in an analog monitor
1.
2.
3.
Notice!
i
When you call up a PTZ camera by a numeric command, the system automatically enters PTZ
mode.
10.2.4
Using the joystick
In Selection Mode, the joystick allows you to use the following features:
–
In PTZ Mode, the joystick allows you to use the following features:
–
–
–
In Jogshuttle Mode, twist the joystick to use the following features:
–
–
–
In Jogshuttle Mode, tilt the joystick to use the following features:
Bosch Sicherheitssysteme GmbH
Press Mon twice.
Switch to a digital mode.
Press Mon, press 1 - 4 to select the desired workstation monitor, press the number of the
desired Image pane and press ENTER.
The numbering of Image panes is from left to right and top to bottom.
Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 412, and ENTER. Then press 7 and ENTER. Camera 7 is displayed on
the 12th Image pane on workstation monitor 4.
Press NEXT.
Press the
softkey and enter the server number.
The server number is configured in Configuration Client in the Server Number list.
When you now enter the logical number of a camera, a camera configured on this
Management Server is displayed.
Switch to analog mode.
Press Mon, press the number of the desired monitor, and press ENTER.
Monitor numbers are configured in the Configuration Client.
Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 3, and ENTER. Then press 4 and ENTER. Camera 4 is displayed in
the 3rd analog monitor.
Tilt the joystick to select an Image pane.
Twist the joystick to zoom in and out.
Tilt the joystick to pan and tilt a PTZ camera.
Use Focus and Iris buttons for a PTZ camera.
Play forward/backward as long as you twist.
Change the playback speed: Speed depends on the degree of rotation.
Stop a video when playing.
Operator's Manual
Using a CCTV keyboard | en
2012.07 | V1 | Operation Client
37
Advertisement
Table of Contents
