Bosch PLN-6TMW Installation And User Instructions Manual page 34

Plena Weekly Timer | Installation and User Instructions | Configuration software
Time
Click the up or down arrow to change the time of a
scheduled event. Hours and minutes have to be clicked
on, and changed individually.
Note
By default, the minimum time between any two
programmable events is one minute.
If you change the time of an event to take place before
or after an existing event, the software will ask you if
you want to sort the event in the schedule. This means
that all events will be re-sorted according to the time.
You can select either YES or NO. Normally it is more
useful to have events sorted according to time.
Chime
Click the pull-down arrow to select a chime type
between 1 and 14 (see table 7.1 for an overview of the
chime types). None can also be selected. Short chimes
can also be set to repeat within the same minute in the
Global system settings (see section 8.7 for more
information).
Chime volume
Click the up or down arrow to change the volume of the
selected chime.
BGM
Click the pull-down arrow to set the Back Ground
Music (BGM) either ON or OFF.
BGM volume
Click the up or down arrow to change the volume of the
BGM.
Bosch Security Systems | 2006-05 | 9922 141 50741 en
Trigger
The Plena Weekly Timer has six output contacts (see
figure 3.4). Each output has four trigger settings (see
table 7.2).
Delete
Click on an entry to select it. An orange box will appear
around the event to show that it is selected
Click the Delete button to delete the entire entry.
Copy and Paste
Use the Copy and Paste buttons to copy single events,
or all the events of one day, to another day.
To copy and paste single events to another day:
1 Click the day tab (at the top of the window) that you
want to copy from.
2 Click the Edit button.
3 Click on the event that you want to copy. An orange
box will appear around the event to show that it is
selected.
4 Click the "Copy one event to another day" radio
button.
5 Click the Copy button.
6 Click the day tab (at the top of the window) that you
want to paste to.
7 Click the Paste button. The copied event will be
inserted.
To copy and paste all the events of one day to another
day:
1 Click the day tab (at the top of the window) that you
want to copy from.
2 Click the Edit button.
3 Click the "Copy whole day events to another day"
radio button. Orange boxes will appear around all of
the events.
4 Click the Copy button.
5 Click the day tab (at the top of the window) that you
want to paste to.
6 Click the Paste button. The copied events will be
inserted.
en | 34