Pioneer DVR-LX61D Operating Instructions Manual page 162

Additional information
19
Problem
No video from the
HDMI output
There's no sound from
the connected HDMI or
DVI device
HDMI Control does not
respond
162
En
Remedy
• If you choose a setting that is incompatible with your TV you may not
be able to see any picture at all. In this case, press  OPEN/CLOSE
while holding down the  (Stop) button on the front panel to switch
the setting (this also switches Component Video Out on page 139 to
the default setting).
• There is no sound when using a DVI terminal.
• Some HDMI-compatible devices do not output sound (check with
the manual that came with the connected device).
• Verify that the HDMI cable is firmly connected (page 21).
• Check whether HDMI Control is set to On for this unit and the device
connected to this unit. For more information, refer to the operating
instructions of your Flat Screen TV, AV system or HD AV converter.
• Depending on the type of Flat Screen TV, some HDMI input terminals
do not support the HDMI Control function. For details, see the
operating instructions supplied with your Flat Screen TV.
• HDMI Control may not operate properly if you do not use a High
Speed HDMI cable.
• This function may not work properly if you have multiple recorders
connected to a single Flat Screen TV, AV system or HD AV converter.
For more information refer to the operating instructions of your Flat
Screen TV, AV system or HD AV converter.
• Controls may not function properly in certain situations, such as
immediately after you have connect an HDMI cable, turn this unit's
power off or remove the power cable for this unit or the connected
component. If you experience any problems, set HDMI Control to On
for all connected units, and then display the pictures stored on this
unit on your Flat Screen TV to improve the situations.
• Check whether the connected component supports HDMI Control or
not.
• Certain functions are not supported on with Flat Screen TVs, AV
system or HD AV converter.
• We cannot guarantee this unit will work with HDMI Control-
compatible components other than those made by Pioneer. When
using HDMI Control-compatible components manufactured by
companies other than Pioneer, set the HDMI Control to Off
(page 147).