Pioneer DVR-LX61D Operating Instructions Manual page 24

Connections
02
HDD camcorder
USB
Digital Camera
Keyboard
Important
• The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if
the device is partitioned, this recorder
may not recognize it.
• Some USB devices may not work with
this recorder.
• When connecting a PC to this unit, make
sure the power is turned off on both the
PC and this unit when you connect them
via USB.
• We recommend connecting USB
devices when this recorder is switched
off (in standby).
• We recommend USB cables 2 meters in
length or shorter.
Connecting an HDD camcorder
On the recorder's HDD, video files can only
be copied with the signal format shown
below.
• Video recording format: MPEG-2 (PS)
• Image resolution: 720
704 480 (576), 352
x
352 x 240 (288)
• Audio recording format: Dolby Digital
• Use a USB cable (supplied with an
HDD camcorder) to connect the USB port
of your HDD camcorder to the front
panel USB port of this recorder.
24
En
HDD/DVD OPEN/CLOSE
HDD DVD A.TV D.TV HDMI
STANDBY/ON
DV IN USB COMMON INTERFACE INPUT 2
ONE TOUCH
STOP REC
COPY
INPUT
CH A.TV/D.TV
SELECT
USB USB
(Type A) (Type B)
USB
PictBridge-compatible
Printer
PC
480 (576),
x
480 (576),
x
HDD camcorder with which operation
is guaranteed (According to our
REC
S-VIDEO VIDEO L(MONO) R AUDIO
survey)
• SONY
DCR-SR300, DCR-SR62, DCR-SR300E,
DCR-SR52E
JPEG file storage devices
• Digital still camera
• Memory card reader (any type of memory
card)
• USB memory
• PC (Use Connect PC function)
The Picture Transfer Protocol (PTP) can be
used to transfer up to a maximum of
4000 files.
WMA/MP3/MPEG-4 AAC file storage
devices
• Memory card reader (any type of memory
card)
• USB memory
• PC (Use Connect PC function)
Note that although multi-slot card readers
can be used, the recorder will only recognize
the first card inserted. To read another card,
remove all the cards and insert the card to be
read again.
Using a USB hub
• Use a hub compatible with USB 1.1 and/
or 2.0.
• Use an independently powered hub (bus
powered hubs may not work reliably).
• In the event of unreliable operation with
the hub, we recommend plugging the
device directly into the recorder's USB
port.
• Operation may become unreliable if too
many devices are connected to the hub.
In this case, try unplugging some
devices.