Operation Checklist - GE ZGU384LSMSS Installation Instructions Manual

4 ASSEMBLE BURNERS,
CHECK IGNITION (cont.)
F. Turn on each burner. On LP models, flames
should be blue in color but may have yellow
tips. Natural gas models should have soft, blue
flames. The burner flames should not flutter or
blow away from the burner. The flame should be
no less than 1/4 on the lowest setting and no
greater than 1-1/2 on highest setting.
1/4 to
1-1/2
Burners should be checked frequently
WARNING:
the flame, please use caution. Burns could result.
G. Place the two side grates so that a continuous
"arc" is formed with the center ribs of both grates.
Make sure both grates are stable and level.
Installation Instructions
Cooktop burner
If you attempt to measure

OPERATION CHECKLIST

1. Make sure all controls are left in the OFF
position.
2. The serial plate for your cooktop is located
on the bottom of the burner box. In addition to
the model and serial numbers, it tells you the
ratings of the burners and the type of fuel and
pressure the cooktop was adjusted for when it
left the factory.
3. When ordering parts, always include the serial
number, model number and a code letter to
ensure proper replacement parts.
4. Check again to be sure all installation
procedures have been completed.
11