Function Mode - Hitachi L700 SERIES Quick Reference Manual

Code Function name
d025 User monitor 0
d026 User monitor 1
d027 User monitor 2
d028 Pulse counter
d080 Trip Counter
d081 Trip monitoring 1
d082 Trip monitoring 2
d083 Trip monitoring 3
d084 Trip monitoring 4
d085 Trip monitoring 5
d086 Trip monitoring 6
d090 Programming error monitoring
d102 DC voltage monitoring
d103 BRD load factor monitoring
d104 Electronic thermal overload monitoring

4.3 Function Mode

Code Function name
F001 Output frequency setting
F002 Acceleration (1) time setting
F202 Acceleration (1) time setting, 2nd motor
F302 Acceleration (1) time setting, 3rd motor
F003 Deceleration (1) time setting
F203 Deceleration time setting, 2nd motor
F303 Deceleration time setting, 3rd motor
F004 Keypad Run key routing
Monitored data or setting
-2147483647 to 2147483647 (upper 4 digits including "-")
-2147483647 to 2147483647 (upper 4 digits including "-")
-2147483647 to 2147483647 (upper 4 digits including "-")
0 to 2147483647 (upper 4 digits)
0. to 9999., 1000 to 6553 (10000 to 65530) (times)
Factor, frequency (Hz), current (A), voltage across P-N (V),
running time (hours), power-on time (hours)
Factor, frequency (Hz), current (A), voltage across P-N (V),
running time (hours), power-on time (hours)
Factor, frequency (Hz), current (A), voltage across P-N (V),
running time (hours), power-on time (hours)
Factor, frequency (Hz), current (A), voltage across P-N (V),
running time (hours), power-on time (hours)
Factor, frequency (Hz), current (A), voltage across P-N (V),
running time (hours), power-on time (hours)
Factor, frequency (Hz), current (A), voltage across P-N (V),
running time (hours), power-on time (hours)
Warning code
0.0 to 999.9 (V)
0.0 to 100.0 (%)
0.0 to 100.0 (%)
Monitored data or setting
0.0, "start frequency" to "maximum frequency"
(or maximum frequency, 2nd/3rd motors) (Hz)
0.0 to 100.0 (when PID function is enabled)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
00 (forward rotation), 01 (reverse rotation)
4 - 3
Chapter 4 List of Data Settings
Default
Default
_FF
0.00
30.00
30.00
30.00
30.00
30.00
30.00
Setting Change
during during
operation operation
(allowed (allowed
or not) or not)
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
Setting Change
during during
operation operation
(allowed (allowed
or not) or not)
00