Toshiba DX1210 series User Manual page 137

Problem
Additional memory module
Please also refer to Chapter 3,
information on installing and removing memory modules.
Problem
An error will occur if a
memory module is
inserted into Slot B
while no memory
module is inserted in
Slot A.
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
Problem
No sound is heard
User's Manual
Procedure
If you are using an operating system that does
not support USB, you are still able to use a USB
mouse and/or USB keyboard by setting the
Legacy USB Support option within the
TOSHIBA HW Setup utility to Enabled.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Hardware, Utilities and
Procedure
Remove the memory module from Slot B and
insert it into Slot A.
Procedure
Adjust the volume.
To increase the volume click the volume up
button, and to decrease it click the volume down
button.
Check the software volume settings.
Please check to see if Mute is turned to Off
Check to make sure the headphone connection
is secure.
Check within the Windows Device Manager
application to ensure the sound device is
enabled and that the device is properly working.
For further information, please refer to
"Troubleshooting in Windows" section of
Windows Help and Support.
Troubleshooting
Options, for further
8-12