Setting the Date and Time
If you selected "PBX Type-Type 2 (KX-TA308)" in the PBX Type setting, you should
set a date and time.
Press the
Select "
Joystick.
Base".
date & time
Enter Day (01-31), Month (01-12),
Year (00-99), Hour (00-12)
and Minute (00-59) from the left.
• Set the current date and time on the base unit. If you do not do so, the date and
time of incoming calls will not be displayed correctly.
Enabling the Outgoing Call Log
The default setting is "Off" for the Outgoing Call Log. You can enable the Outgoing Call
Log if needed.
Press the
Select "
Joystick.
Handset".
Select
"Outgoing Log".
• Only the numbers you dial, or numbers dialed using Hot Key Dial or Phonebook
will be stored in the Outgoing Call Log.
Before Operating the Handset
Setting
Press the
Setting
Joystick.
Enter Password
----
Press the
Enter your password.
Joystick.
(default: 1234)
Press the
Select
Joystick.
"Date&Time".
Press the Right
Soft Key to
select
"AM" or "PM".
Select "Other
Option".
Press the
Joystick.
Press the
Joystick.
Press the
Joystick.
Select "On".
Press the
Joystick.
7