Inlet Hose Connection - NEC NFL-1065 Instruction Manual

INLET HOSE CONNECTION

The washer should be connected to the water mains using new hose sets, old hose sets
should not be reused.
In using only one water tap or in case of only one water inlet valve, connect the inlet hose to
the cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet.
For Screw-Shaped Tap
1 Connect the inlet hose to the water tap by 2Connect the inlet hose adapter to the water
screwing the connector tightly. inlet of a washer and turn it to be fixed.
*Check the packing in the inlet
5