The Functions Of The Control Panel - NEC NFL-1065 Instruction Manual

THE FUNCTIONS OF THE CONTROL PANEL

Press this switch to turn the power on or off.
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the "Start/Hold" button
"Start/Hold" button again.
You can select the course you want, and each lamp is turned on when that course is selected.
For the more detailed information, please refer to pages 11~18.
It can be used to adjust temperature of water according to types of the load to be washed.
As the button is pressed, temperature of water is selected by
Cold
By pressing the spin button, the spin speed can be chosen.
Rinse Hold
No spin
Crease Care • If you want to prevent crease, select this button with spin speed.
Rinse+
Pre-Wash
All courses have pre-set washing times, but Time Save decreases it to 10 minutes.
Each time this button is pressed the watch icon is repeated on and off. When it is on, the Time
Save function is set. Time Save is available in Cotton, Eco and Synthetic programs.
It can be used to pre-engage time for wash.
Use this function when you want to protect any accident occurring from handling of washer by a child.
During an operation of washer, press 'Time Save' and 'Time Delay' buttons simultaneously.
In Child Lock mode, no button functions except Power button.
In Child Lock mode, press 'Time Save' and 'Time Delay' buttons simultaneously like setting Child
Lock and Child Lock is cancelled.
To change to the desired program, while in Child Lock mode;
1. Press both the Time save and Time delay buttons together once again.
2. Press the Start/Hold button.
3. Select the desired program and press the Start/Pause button again.
* The child lock can be set at any time and it is automatically cancelled when operational errors
occur. Also child lock is cancelled when power is off.
Select the program that you want to change
30˚C 40˚C 60˚C 95˚C
• Is selected by pressing the spin button repeatedly. This function leaves clothes
in the machine; suspended in the water after a rinse without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold function is
completed, use spin button.
• If no spin is selected, the washer stops after draining water.
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
• The washer operates one additional wash and spin before the main wash.
• If the laundry is heavily soiled, Pre-Wash course is effective.
• Pre-Wash is available in Cotton and Synthetic programs.
9
press the
Change
the desired
program