Environmental Limit - Hitachi Printers Getting Started Manual

Scancenter printers
Table of Contents

Advertisement

Use the standard cable attached provided with the scanner. Other-
wise, use cables that meet the following requirements:.
Area
North
America
Europe
WARNING!
When using the optional ScanCenter Stand, do not place the scanner on
the stand until the printer is in place and the entire unit is in the desired
location.
Do not move the stand when the scanner is on the tray. Always take the
scanner off of the stand when moving.
WARNUNG
Wenn Sie das optionale ScanCenter-Gestell verwenden, stellen Sie den
Scanner nicht darauf, bis der Drucker in seine Position gebracht ist und
sich die gesamte Geräteeinheit an der gewünschten Stelle befindet.
Verschieben Sie das Gestell nicht, wenn der Scanner darauf steht. Nehmen
Sie stets den Scanner herunter, bevor Sie das Gestell verschieben.

Environmental Limit

Following are the recommended environmental limits:
A-6
Safety Information
Rating
120V
NEMA 5-15P
10A
230V
Use the required
(220-240V)
equivalent for
10A
each country
!
Temperature range: 50 -90 F (10 -32 C)
Humidity range: 20-80% RH
Plug
Cable
SVT or SJT 18/3
AWG Less than
1.6 m long
H05VV-F or
H05VVH2-F
3 x 1.00mm
Connector
IEC320 type
EN60320 type
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

ScancenterSc1

Table of Contents