To Set The Baud Rate - HP 34401A User Manual

Chapter 4 Remote Interface Reference

To Set the Baud Rate

To Set the Baud Rate
You can select one of six baud rates for
to 9600 baud when the multimeter is shipped from the factory. See also
"Baud Rate Selection," on page 93.
On/Off
Shift <
1 Turn on the front-panel menu.
A: MEAS MENU
< <
2 Move across to the
E: I/O MENU
> >
3 Move down a level and then across to the
3: BAUD RATE
4 Move down to the "parameter" level to select the baud rate.
Use the left/right arrow keys to see the baud rate choices. Choose from
one of the following: 300, 600, 1200, 2400, 4800, or 9600 baud.
9600
Auto/Man
5 Save the change and exit the menu.
ENTER
The baud rate selection is stored in non-volatile memory, and does not
change when power has been off or after a remote interface reset.
choice on this level.
I/O MENU
BAUD
operation. The rate is set
RS-232
command.
BAUD RATE
4
163