Advertisement
Preparation before installation-1.
(LCD TV with stand type)
Caution
•
Before operation, please make sure all the parts in parts list are included on page 12.
•
Pull out the power plug from the socket, then pull out cable which is used for the connection of antenna and
external equipments.
•
Please use cloth and plastic film to prevent the cable damage during installation. Meanwhile, please be careful during
operation.
•
Please store the removed stand carefully.
•
Please put a soft blanket or alike on a flat place, in order to prevent the damage of the LCD TV screen.
•
Please follow the steps below to remove the base of the LCD color TV.
(1) Pull out all connections.
(2) Remove 4 fixing screws.
(3) Please raise LCD TV screen vertically to remove stand.
Please store the fixing screws in step (2)
and stand in step (3) carefully.
(4) Please put a soft blanket or alike on a flat place,
in order to prevent the damage of the LCD TV screen.
Then place TV with screen side facing down.
Preparation before installation-2.
(TV set body and stand separated type)
1 Please take out the LCD color TV body and stand parts packed from the LCD TV case.
2 To prevent damage of the screen, please put a blanket or alike on a flat place and put the LCD color TV with the
screen side facing down.
3 Please keep the stand assembly parts.
(Take out TV set)
•
LCD TV must be kept in vertical position when remove the stand.
•
Please read this LCD TV operation manual.
Back
Stand
Stand
LCD TV
Back
(Take out TV stand)
LCD TV
Blanket or alike
Fixing screws
4-pcs
Blanket or alike
(Keep)
7
Advertisement
