Advertisement
Preparation before installation
(The operation must be done by qualified technicians)
Cautions
● Before the operation, make sure 18
● Pull out the power plug from the socket, and pull out the antenna and external equipments from the TV.
● Please use cloth and plastic film to prevent the cable damage during installation. In addition, please be careful during operation.
● Please store the removed stand and other components carefully.
● Please put a soft blanket on a flat place and put the LCD color TV with screen side facing down.
● Please read this book with the stand installation instruction.
Assembling and Installation(1)
(The operation must be done by qualified technicians)
1
Remove the four "fixed screws" located at the back of the LCD TV taken from the case.
● Please keep the removed fixed screws and the desktop stand packed together with the TV properly.
Blankets, etc.
2
Attach "TV fix bracket" to TV set with the supplied 4 screws and "spacer".
● The combination of the mounting screws and pads will be different depending on the installation angle, size of the TV
screen, the installation direction and shape of the terminals.
(1)
Please refer to the table at the lift side when selecting the proper combination of the small components.
*
The combination of the attachments corresponding
to the installation conditions of 46/55WL700E/T
Model
46WL700E, T
attached small parts
55WL700E, T
attached small parts
* For other models, select and install the right small parts by the size of
the TV screen, installation angle, installation direction and shape of the
terminals according to the table at left.
C100047_WAL14C_EN.indd
7
■ The operation of taking the TV out of the case or removing it from the stand shall be
taken by at least 2 people.
Injury or pain may cause for operation by one people.
all the parts in the list are prepared.
Fixed screws
* Fixed screws available or not at the back of the LCD TV set depend on
different models.
Spacer
Protection
paper
Peel off the protection of
double-sided adhesive paper, fix
the spacer to the screw at the still
bracket of the TV set body.
Installation angle of the TV set
0°
5°
10°
15°
Ⓔ
Ⓔ
Ⓓ
Ⓒ
Ⓔ
Ⓓ
Ⓒ
Ⓒ
(Installation of the LCD TV without dedicated speaker)
The relationship between the combination of small components
and the distance between the back of the TV set to the wall.
Distance between the back of TV and the wall when attaching small parts
Symbols on the
Part name
package
SCREW (M8/M6×75)
Ⓐ
spacer (L=61mm)
Distance between the back of TV and the wall = 88mm
SCREW (M8/M6×55)
Ⓑ
spacer (L=41mm)
Distance between the back of TV and the wall = 68mm
SCREW (M8/M6×40)
Ⓒ
spacer (L=26mm)
Distance between the back of TV and the wall = 53mm
SCREW (M8/M6×25)
Ⓓ
spacer (L=11mm)
Distance between the back of TV and the walll = 38mm
SCREW(M8/M6×14)
Ⓔ
spacer
Distance between the back of TV and the walll = 27mm
Quantity
4
4
4
4
4
4
4
4
4
NO
7
2010/12/15
13:34:02
Advertisement
