Table of Contents
Advertisement
3.
Turn on your TV.
4.
Be sure that your TV is set to view the correct video source (such as video 1 or video 2).
5.
Press
fn+f4
your TV.
If you connected your TV after running the Setup Wizard for the first time, you may need to
reconfigure settings.
NOTE:
If you have not yet run the Setup Wizard, you do not need to perform the following
procedure. The Setup Wizard will guide you through all the configuration steps required for your
connection.
Configuring the TV display
You can use MediaSmart, QuickPlay, or Windows Media Center to configure the display on your TV.
To configure the TV display using MediaSmart, follow these steps:
1.
Open MediaSmart by pressing the media button on your computer.
2.
Click the TV icon on the SmartMenu.
3.
Click the Settings icon, and then click TV Source.
4.
Follow the on-screen instructions.
on your computer keyboard one or more times to display your computer screen on
Adding a TV to your system
23
Advertisement
Table of Contents
