Comprehensive Install Instructions - HP 1032 Manual

Comprehensive Install Instructions

Comprehensive Install Instructions
Index | Administrators Guide | Users Guide | Tool Overview | Related Documents | Dictionary
1.2.1 Comprehensive Installation Overview
Step 1 Fill Out the ClusterPack Installation Worksheet
Step 2 Install Prerequisites
Step 3 Allocate File System Space
Step 4 Obtain a License File
Step 5 Prepare Hardware Access
Step 6 Power Up the Management Server
Step 7 Configure the ProCurve Switch
Step 8 Copy the License Files to the Management Server
Step 9 Install ClusterPack on the Management Server
Step 10 Run manager_config on the Management Server
Step 11 Run mp_register on the Management Server
Step 12 Power up the Compute Nodes
Step 13 Run compute_config on the Management Server
Step 14 Set up HyperFabric (optional)
Step 15 Set up InfiniBand (optional)
Step 16 Run finalize_config on the Management Server
Step 17 Create a Golden Image of a Compute Node from the Management Server
Step 18 Add nodes to the cluster that will receive the Golden Image
Step 19 Distribute the Golden Image to the remaining Compute Nodes
Step 20 Install and Configure the remaining Compute Nodes
Step 21 Verify the final cluster configuration
1.2.1 Comprehensive Installation Overview
ClusterPack uses a two-stage process for setting up an HP-UX Cluster:
Create a base configuration with a Management Server and one Compute Node
ClusterPack
Prepare for installation.
Install and configure the Management Server.
Install and configure the initial Compute Node and its Management