The bo command without arguments prompts you to select a partition to boot:
bo This command controls power enable to a partition.
Partition
Number
---------
1
1:1
1:2
1:3
1:5
1:21
2
2:1
3
4
5
Q)
Select partition number:2:1
Poweron request sent to partition 2:1.
Operation initiated successfully.
Please run PARSTATUS/VPARSTATUS or SHOW SYSLOG OA to determine the completion
status of the operation.
The pe command also prompts you to select a partition:
pe
This command controls power enable to a partition.
Partition
Number
---------
1
1:1
1:2
1:3
1:5
1:21
2
2:1
3
4
5
Q)
Select partition number: 2:1
The power state is OFF for partition 2:1.
In what state do you want the power? (ON/OFF) on
Booting from the GUI
You can go to the individual partition screens from the left navigation pane regardless of whether
the partition is an nPartition or a vPar.
1.
Select a partition that you want to activate.
52
Booting and resetting Partitions (nPartitions and vPars)
Partition
Name
---------
nPar0001
nPar0001:vPar1
nPar0001:vPar0002
nPar0001:we
nPar0001:vPar0005
nPar0001:vPar0021
nPar0002
nPar0002:vPar0001
hard_partition
nPar0004
nPar0005
Quit
Partition
Name
---------
nPar0001
nPar0001:vPar1
nPar0001:vPar0002
nPar0001:we
nPar0001:vPar0005
nPar0001:vPar0021
nPar0002
nPar0002:vPar0001
hard_partition
nPar0004
nPar0005
Quit