Set Partition Dvd - HP Integrity Superdome 2 16-socket Administrator's Manual

Access level/Bay level:
OA Administrator, OA Operator
Restriction:
You must be connected to the monarch OA.
From the GUI
For information on rebooting the partition, see

SET PARTITION DVD

From the CLI
Command:
SET PARTITION DVD {CONNECT | DISCONNECT}{nPartition number or
name}[:vPartition number or name] [ENCLOSURE {enclosure number}]
Description:
Connect or disconnect the specified partition from the specified URL or local enclosure DVD
drive. DISCONNECT will detach any URL in addition to "Enclosure DVD".
IMPORTANT:
any of the blades in the nPartition must be assigned to the target virtual partition.
NOTE:
rebooted. The DVD module may only be connected to a partition if there is a EI Torito CD
format media inserted in the drive.
Access level/Bay level:
OA Administrator, OA Operator
Restriction:
You must be connected to the monarch OA.
From the GUI
The Virtual Media (vMedia) feature provides a virtual floppy disk, USB Key, or DVD. This allows
an HP Superdome 2 partition to boot and use standard media on the network to which the iLO on
a blade is connected. vMedia is also the mechanism used to give partitions access to the enclosure
DVD drive.
To connect to the enclosure DVD drive, the partition must be active. Select the Virtual Devices tab,
and then click the Connect to Enclosure DVD.
Before connecting a DVD to a virtual partition, the iLO rootport (or ioslot) from
The DVD module is disconnected from a partition when the partition is shutdown or
"From the GUI".
Task Summaries for Rebooting and Resetting Partitions 65