Option
[-V flag]
Access level/Bay level:
OA Administrator, OA Operator
Restriction:
You must be connected to the monarch OA.
PARMODIFY
Command:
parmodify -p nPartition_id | -Z parspec_name
{[-a blade:blade_path:[blade_type]:[use_on_next_boot]:
[-a io:iobay_path:[use_on_next_boot][:failure_usage]]...
[-c new_parspec_name]
[-d blade:blade_path]...
[-d io:iobay_path]...
[-m blade:blade_path:[blade_type]:[use_on_next_boot]:
[-m io:iobay_path:[use_on_next_boot][:failure_usage]]...
[-n res_type:ia_value]
[-B ]
[-G memory_granularity_type:size]
[-L slm_value]
[-M type:max_value]
[-N next_boot_mode]
[-O os_name]
[-P new_nPartition_name]
[-T hyper_threading_flag]
[-V vga_flag]
[-X parspec:change_policy_flag]}
Description:
Modifies the attributes of an existing nPartition or a partition specification. This command can
modify the following attributes:
◦
nPartition name
◦
VGA assignment
◦
Next boot mode
◦
Partition Specification
◦
Blade assignment
◦
Attributes of existing blades
◦
IO bay assignment
◦
Attributes of existing IO bays
132 Partition commands
[failure_usage]:[slm_value]]...
[failure_usage]:[slm_value]]...
Meaning
requested resources specified in the parspec is not
available for assignment to the partition at boot time.
Enable/Disable VGA in an nPartition. The flag value
can be either enable or disable. By default, VGA
is enabled in an nPartition. VGA is always disabled
when running vPars in an nPar.