Set Session Timeout; Set User Access; Set User Contact - HP Integrity Superdome 2 16-socket User Manual

SET SESSION TIMEOUT

IMPORTANT:
subject to the session timeout defined by the SET SESSION TIMEOUT command:
SHOW {HR | FPL | LIVELOGS | SEL | SYSLOG | PARTITION CONSOLELOG}
CONNECT {BLADE | INTERCONNECT | PARTITION }
CO
FPL
SEL
If a user has one of these commands active, their session will not be removed when a session
timeout occurs; instead it will be removed once they exit the long-running command and interact
with the CLI. Furthermore, the SHOW USER SESSIONS command will not display the active session
after a session timeout occurs.
Command:
SET SESSION TIMEOUT <timeout>
Description:
Sets the number of minutes before inactive sessions are removed. The default setting is 1440.
The session timeout can be disabled by setting the timeout value to zero.
NOTE:
Access level/ Bay level:
OA Administrator
Restriction:
Valid session timeout values range from 10 to 1440 minutes (24 hours).

SET USER ACCESS

Command:
SET USER ACCESS "<user name>" {ADMINISTRATOR | OPERATOR | USER}
Description:
Sets the user access level. Additionally, use the ASSIGN command to give the user access
rights to the Onboard Administrator, server bays, and interconnect bays.
Access level/Bay level:
OA Administrator
Restrictions:
None

SET USER CONTACT

Command:
SET USER CONTACT ["<user name>"] "<contact info>"
Description:
Sets the contact information field for the user. If there is no <user name>, the command
modifies the contact information of the user who executed the command.
26 User account commands
On Superdome 2 systems, the following long-running commands are not immediately
If the session timeout value is lowered, currently inactive sessions may be removed.