Table of Contents
Advertisement
INSTALLATION
Service
The junction box PCB is not repairable. Please order a new junction box as necessary.
Connections
1.
Connect all accessories to the junction box. If it is required please see "Re-crimp Procedure"
on page 61to be able to connect your accessory.
2.
Connect the mobile-terminal-to-Junction box cable to the junction box.
3.
Connect the programming cable to the junction box (if required).
7
6 5 4
3 2 1
3
2
7
6
5
4
3
2
1
7
6 5 4 3
2 1
MTM5400 Mobile Terminal Installation Manual
1
Figure 23 Connectors on the Junction Box - Front Panel
PIN 4: Use an adapter between the radio and the
accessory connector to short the ignition to ground.
Interference can cause radio to hang.
1 = Connecting cable from Junction Box
to MTM5400 (rear side 26-pin
accessory connector) for installation
purpose only.
PMKN4101A (length 6 m)
PMKN4102A (length 4 m)
PMKN4103A (length 2 m)
2 = Connector for accessory terminal
pin 1 SPEAKER +
pin 2 SPEAKER -
pin 3 EXT_PTT
pin 4 IGNITION SENSE
pin 5 EXT_ALARM
pin 6 EMERGENCY
pin 7
3 = Connector for visor microphone
53
Advertisement
Table of Contents
