Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WMB81445L
Summary of Contents for Beko WMB81445L
- Page 1 Automatic Washing Machine WMB81445L...
- Page 2 Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Washing Machine Starting the Program ....21 Progress of program ....21 Overview ......4 Changing the selections after the program Specifications . -
Page 4: Your Washing Machine
Your Washing Machine Overview 4 - Control Panel 1 - Detergent Drawer 5 - Filter Cap 2 - Door 6 - Height-adjustable feet 3 - Top Lid 4 - EN... -
Page 5: Specifications
Specifications Models WMB81445L Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (±4 kg) Electricity (V/Hz.) 230 V / 50Hz Total Current (A) Total Power (W) 2200 1400 Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. -
Page 6: Warnings
Warnings Please read the following information. First Use Otherwise, there may be the risk of • To prepare your machine for washing, personal injury or material damage. carry out your first washing process Moreover, any warranty and reliability without loading your machine and commitment will become void. with detergent under “Cottons 90°C” Programme. General Safety • Ensure that the cold water connections • Never place your machine on a carpet has been made correctly when installing your machine. -
Page 7: If There Are Children In Your House
Electrical connection always be securely fastened and remain in an undamaged state. Make sure that you have an earthed power • Fit the draining hose to a washbasin or outlet socket rated at 13 amps (minimum). waste system securely before starting Attention! up your machine. There may be a risk If you place your machine under a worktop, of being scalded due to high washing the socket must be reachable after temperatures! installation, or a separate switch (which can... - Page 8 plug. Fuse covers are available from any good electrical store. Important Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’...
-
Page 9: Installation
Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future. Never move the appliance without the transportation safety bolts properly fixed in place! Appropriate installation location... -
Page 10: Connecting To The Water Supply
Connecting to the water supply. Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1 MPa). (Practically, it is necessary to have 10 – 80 liters of water flowing from the tap in one minute to have your machine run smoothly.) Attach a • Models with a single water inlet should pressure-reducing valve if the water not be connected to the hot water pressure is higher. -
Page 11: Electrical Connection
Destroying the packaging ground), water discharge becomes more difficult and the laundry may material come out wet. Therefore, the heights Packaging material can be dangerous to described in the figure should be children. Keep the packaging materials out followed. of reach of children or dispose them by • To prevent dirty water refilling the classifying according to waste directives. Do machine, and to allow for easy not dispose of them together with normal discharge, the end of the hose must not... -
Page 12: Initial Preparations For Washing
Initial preparations for washing Sorting the laundry clips. If possible, turn pockets out and brush. • Sort the laundry according to type of • Place small items like infants’ socks and fabric, colour, and degree of soiling and nylon stockings, etc. in a laundry bag, permissible water temperature. pillow case or something similar. This Always follow the advice on the garment will also save your laundry from getting labels. -
Page 13: Loading Door
Following weights are given as examples. Detergent, softener and other cleaning agents Laundry type Weight (gr.) Add detergent and softener before starting Bathrobe 1200 the washing Programme. Napkin Never open the detergent dispenser drawer Duvet cover while the washing Programme is running! When using a Programme without pre- Bed Sheet wash, no detergent should be put into the Pillowcase pre-wash compartment (Compartment no. - Page 14 Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used. • If the softener has lost its fluidity, dilute dense softener with water before placing it in the detergent drawer. Liquid detergent When using liquid or gel washing detergents, please note the following: • The liquid detergent may leave stains on your laundry if time delay feature is selected.
-
Page 15: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control panel 5 - On/Off Button 1 - Spin Speed Adjustment Button Display 6 - Time Delaying Button (+/-) 3 - Temperature Adjustment Button 7 - Auxiliary Function Buttons 4 - Program Selection Knob 8 - Start/Pause/Cancel Button Display symbols - Spin Symbol - Spin Speed Indicator c – Water cut-off symbol (According to c d e your machine’s model) -
Page 16: Turning The Machine On
Turning the machine on is recommended. Detergent should not be put in the pre-wash compartment. Less Plug in your machine. Turn the tap on detergent should be put in the main wash completely. Check if the hoses are compartment as loose knit fabrics (lace) connected tightly. Place the laundry in the foam too much due to its meshed structure. machine. Add detergent and softener. Press •... -
Page 17: Special Programs
cotton garments. E.g.: bathrobes, duvet Sort the laundry according to type covers, sport wear, daily clothes and etc. of fabric, color, degree of soiling and used only once. permissible water temperature while • A Class 40 choosing a program. This programme washes for a longer Always select the lowest required period at 40°C and gives the same result temperature. -
Page 18: Spin Speed Selection
Economy Symbol Shows energy saving programs and temperature selections. As “Intensive” and “Hygiene” programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up. Spin Speed selection Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator. -
Page 19: Program And Consumption Table
Program and consumption table Auxiliary functions Selectable temperature Programme range °C Cottons 2.60 max. • • • • • • 90-Cold Cottons 1.75 max. • • • • • • 90-Cold Cottons 0.90 max. • • • • • • 90-Cold Duvet 0.75... -
Page 20: Auxiliary Functions
slightly soiled laundries. • Extra Rinse Auxiliary functions When this function (c) is selected, washing Auxiliary Function Selection Buttons and rinsing is performed with plenty of water. “F3” symbol lights up on the display. • Anti- Crease With this function (d), drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. “F4” symbol lights up on the display. -
Page 21: Starting The Program
minutes. be displayed. 1. Open the loading door, place the 4. Press Start/Pause/Cancel Button to laundry inside and fill detergent drawer. start the program. 2. Set the washing program, temperature, spin speed and, if required, select the Starting the Program auxiliary functions. 1. Press Start/Pause/Cancel button to 3. Press “Time delaying” buttons “+” and start the program. “-” to set your desired time delay. The 2. -
Page 22: Changing The Selections After The Program Has Started
Changing the selections after the In this case, no change can be made in the running program. program has started Your machine can be turned on and The selected spin speed and program off with On/Off button while the child- temperature fade out. An empty frame proof lock is activated. In this case, your appears. -
Page 23: End Of Program
Adjust the spin speed. Press “Start/Pause/ Cancel” button. The program continues, pumps out the water and spins. The Standby Symbol fades out and Start Symbol lights up. If you want to discharge the water only without spinning: Press “Start/Pause/Cancel” button. The Standby symbol will fade. The Start symbol will light up. The program continues and only drains the water. -
Page 24: Quick Instructions For Daily Use
Quick instructions for daily use Preparation loading door or if the temperature in the 1. Turn the tap on completely. Check that machine is low). the hose is connected tightly. In order to add laundry after the start-up 2. Place the laundry in the machine. of the programme: 3. Add detergent and softener. 1. Press “Start/Pause/Cancel” button. - Page 25 3. Turn the water tap off. 4. Remove any folds in the rubber seal on the loading door and check for debris. 5. Leave the loading door and detergent drawer open to dry. 25 - EN...
-
Page 26: Cleaning And Care
Cleaning and care Detergent drawer cleaning agent. Never use steel wool or wire wool. Remove any powder residue buildup in the drawer. To do this; Outer cabinet and control panel 1. Press the dotted point on the siphon in the softener compartment and pull When necessary: towards you until the compartment is • Wipe the exterior panels of your removed from the machine. -
Page 27: Draining Any Remaining Water And Cleaning The Pump Filter
and tighten the hose nuts by hand. Draining any remaining water and cleaning the pump filter Filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump propeller during discharging of the washing water. Thus, a good water discharge is achieved and the 3- An emergency drain hose is supplied pump life is extended. - Page 28 filter to receive water flowing from the filter. • Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water. • When there is no water left, turn the pump filter until it is completely loose and remove it.
-
Page 29: Solution Suggestions For Problems
Solution suggestions for problems Cause Explanation / Suggestion Programme cannot be started or selected. Machine may have switched to self Bring your machine to factory settings by turning protection mode due to an infrastructure the Programme selection knob. (see, Ending the problem (such as line voltage, water Programme through Cancelling) pressure, etc.). Water in the machine. There may be some water in your machine when you receive it. This is from the quality It is not harmful to your machine. - Page 30 The door is jammed. - Water level might be above the lower level of the door. - Machine might be heating up the water or - Run either the “Pump” or “Spin” Programme. it may be at the spinning cycle. - Wait until the process is over. - Due to an electrical mechanism, the door - Wait until the process is over.
- Page 31 It continuously washes. Remaining time does not count down. - The machine will wait until there is sufficient amount of water to avoid poor washing results due In the case of a paused countdown while to lack of water. Then the timer will start to count taking in water: down.
- Page 32 - Washing performance is poor: Oily stains appear on laundry. - Washing performance is poor: Bad odour - Such odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short Programmes. - Oily accumulations on the drum may have - Leave the detergent dispenser drawer as well stuck to the laundry. as the loading door of the machine ajar after each - Oily accumulations on the drum may have washing.
- Page 33 Clothes do not smell like the softener. - If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness. - Insufficient amount of detergent used. - If detergent is put in the prewash compartment - The detergent was placed into the wrong although prewash cycle is not selected, machine...
- Page 34 Machine does work. Nothing is displayed on the screen. The plug might not be plugged in the mains outlet. Check the plug. Fuse may have blown. Check the fuse. Electricity may be cut off. Check the supply power. The “On/Off” button might have not been Press this button. pressed. The machine did not start after the program was selected and the «Start/Pause/Cancel» button was pressed. The front door may be ajar. The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water cut-off symbol may light up too) You can restart your machine by pressing the «Start/...
-
Page 35: Guarantee
Republic of Ireland. • The cost of functional replacement • The guarantee is applicable only to new parts, but excluding consumable items. products and is not transferable if the • The labour costs of a Beko approved product is resold. repairer to carry out the repair. • Beko disclaims any liability for incidental or consequential damages. What is not covered? • The guarantee does not in anyway... -
Page 36: Service
Service Please keep your purchase receipt or other Should you experience any difficulty in proof of purchase in a safe place; you will obtaining service please contact the Beko need to have it should the product require Customer Help-Line. attention under guarantee. Tel: 0845 600 4911 e-mail:service@beko.co.uk You should also complete the details below; it will help us assist you when requesting service. (The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label... - Page 37 37 - EN...
- Page 38 38 - EN...
- Page 39 39 - EN...