e
Press Mono Start or Colour Start.
Faxing from the ADF
The machine starts scanning the
document to be sent.
Faxing from the scanner glass
If you pressed Mono Start, the
machine starts scanning the first
page. Go to step f.
If you pressed Colour Start, the
machine starts dialling and sending
the document.
f
When the LCD asks you Next Page?,
do one of the following:
To send a single page, press 2 to
choose No(Dial) (or press
Mono Start again).
The machine starts sending the
document.
To send more than one page, press
1 to choose Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
h
After all the pages have been scanned,
press 2 or Mono Start to start.
Stop faxing
To stop faxing, press Stop/Exit.
Setting scanner glass size for
faxing
4
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a
Load your document.
4
b
Press
c
Press Menu, 3, 2, 0.
d
Press a or b to choose Letter (or A4).
Press OK.
e
Press Stop/Exit.
f
Enter the fax number.
g
Press Mono Start or Colour Start.
NOTE
This setting is only available for sending
documents from the scanner glass.
Colour fax transmission
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the
machine's memory. When you send a colour
fax, the machine will send it in real time (even
if Real Time TX is set to Off).
Cancelling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
Sending a fax
(FAX).
4
4
4
4
23