1 - 6
MC9090-G RFID Integrator Guide Supplement
Charging the Main Battery
Charge the main battery in the mobile computer using a cradle, the CAM with a charging cable, or the MSR with
the appropriate power supply.
Ensure the accessory used to charge the main battery is connected to the appropriate power source (see
1.
Chapter 2, Accessories
Insert the mobile computer into a cradle or attach the appropriate snap-on module.
2.
The mobile computer starts to charge automatically. The amber charge LED, in the Indicator LED Bar, lights to
3.
show the charge status. See
The main battery usually fully charges in less than four hours.
Mobile Computer LED Charge Indicators
Table 1-2
LED
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber
for setup information).
Table 1-2
for charging indications.
Mobile computer not in cradle or the mobile computer is not attached to the CAM or
MSR. Mobile computer not placed correctly. Charger is not powered.
Error in charging; check placement of the mobile computer.
Mobile computer is charging.
Charging complete.
Indication