Mode Menu; Inventory; Locate Tag - Motorola MC9090-G Manual

5 - 10 MC9090-G RFID Integrator Guide Supplement

Mode Menu

Tap the Mode menu to use the Inventory method to read tags, locate a tag, program a tag, scan a bar code, or write
a tag. Mode menu options offer all of the operations available by tapping an icon on the main Tags window menu
bar.

Inventory

Tap Mode - Inventory to start reading tags using the Inventory method. Using this method, the application performs
as if the trigger is pulled. Tag read attempts continue until the Inventory menu option is tapped again.

Locate Tag

This option is used to find a specific tag.
Tap in the main Tags window or tap Mode - Locate Tag.
1.
RFID - Locate Tag Window
Figure 5-7
Enter a valid Tag ID in the text box below the magnifying glass:
2.
•
An 8-byte hex string for 64 bits
•
A 12-byte hex string for 96 bits.
NOTE To pre-fill the text box with a valid Tag ID, select a tag in the main Tags window and tap
Pull the trigger to locate the tag. The mobile computer beeps when the tag is found. The faster the beep, the
3.
closer the mobile computer is to the located tag.
Figure 5-7 shows tag ID 80 00 80 04 23 23 84 33 was read 83 times.
Tap Back to Global Scroll to return to the main Tags window.
4.
Tag ID
(Hex
string)
64 bits
or
96 bits
.