Panasonic KX-TDA100 Installation Manual page 166

2.8.5 Site Survey Using the KX-TCA255/KX-TCA256/KX-TCA355/KX-TD7590
b.
Overlap the CS coverage areas of at least 2 CSs at any location in the installation site.
c.
Make sure that the radio signal strength level is greater than "3" at any location in the service area
required by the user.
Note
•
If a channel is set, the results of measurement for the 24 slots on the channel are saved each time.
If the same channel is set, the new results override the previous ones. Therefore, a measurement
of 10 channels ´ 24 slots in total can be made.
•
If correct results cannot be obtained (e.g., there are many frame errors), change the location of the
CS and repeat the site survey to select the best location.
Referring to the Stored Scan Data
Using the KX-TCA255/KX-TCA256/KX-TCA355
Press 1, 9, and POWER
for more than 2 seconds.
To go to other slots
/
A a
Previous or Next
166 Installation Manual
Channel no. 0
Channel no. 2
Log No.
0 to 9
To go to specific channel
Channel No.
0 to 9
Channel no. 1
Channel no. 3