Panasonic KX-TDA100 Installation Manual page 204

2.9.7 Connecting a Cell Station to the PBX
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering
the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the
PBX with the matching PIN.
Note
•
By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can be
registered to the PBX without setting the PIN.
•
The PIN for PS registration will only be used when registering the PS to the PBX.
Therefore, during normal operation after registration, even if there is more than 1 PBX with the same
PIN near the PS, the PS will not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
ENTER
Setting the PIN for PS
Using the KX-TD7684/KX-TD7694
Select
"Change PIN"
Using the KX-TD7680
Select
"CHANGE PIN"
Using the KX-TD7690
Select
"CHANGE PIN"
204 Installation Manual
PIN for PS Registration
4 digits
1234
PIN for PS Registration
1 to 8 digits
1234
PIN for PS Registration
1 to 4 digits
1234
SEL
PIN for PS Registration
1 to 4 digits
S1
1234
END
ENTER
(HOLD)
C.Tone
C.Tone
ENTR
C.Tone
S1