Table of Contents
Advertisement
3. Determine the width of the rack or mast and, if necessary,
attach a pair of mounting flanges to the sides of the chassis in
the appropriate locations. Flanges for the right and left sides
are identical.
– For 19-inch rack mounting, use the existing flanges formed
in the sheet metal at the forward corners of the chassis.
– For a 19-inch mast installation, mount a set of flanges at
the center (see Figure 2-1), narrow side out.
– For a 23-inch rack or mast installation, mount the flanges
wide side out (at the forward corners for a rack, at the
center for a mast).
FOR 23-INCH INSTALLATIONS
11276.00 9503
Figure 2-1. Flange Installation on the XR900 Chassis
Rack/Mast Mounting
FOR 19-INCH INSTALLATIONS
OPTIONAL CENTER LOCATION
FOR MOUNTING FLANGES
2
2-3
Advertisement
Table of Contents
