Mitsubishi Electric CP-D2E User Manual page 11

WARNING
Do not use the printer with an AC adapter or power cord other
than that specified/provided
Do not use the provided AC adapter or power cord with any
other devices
Provide correct voltage
Incorrect voltage may damage printer parts.
Use with incorrect voltage may cause fire or electric shock.
Connect the power cord correctly/safely
If the power cord is plugged in loosely, it may cause a fire or electric shock.
Push the plug all the way into the outlet.
Make sure that excessive dust and debris do not accumulate
on the power cord
Dust and debris may conduct electricity, which can cause fire and electric shock.
If excessive dust and debris accumulate on the cord, unplug the cord and clean it.
Always unplug the power cord during an electrical storm
The induced electricity from storms may cause fire, electric shock, or printer
malfunction.
Do not hold the power plug with wet hands
Doing so may result in fire, electric shock, or printer malfunction.
Be sure your hands are dry before handling.
Plug the printer directly into an outlet
Avoid overloading outlets with use of extensions and adapters, etc.
Do not move the printer when the power cord is taut
Moving the printer when the power cord is taut may damage the cord.
Using the printer when damaged may cause fire or electric shock.
When moving the printer, unplug and bundle the power cord.
Safety regulations
EN-11