Error Signals - Mitsubishi Electric CP-D2E User Manual

Error signals

Indicator
Indicator
status
Power On
Off
Access On*
Blinking
slowly
Blinking
very slowly
PAPER Blinking
slowly
RIBBON Blinking
slowly
Access and PAPER Blinking
together
Access and Blinking
RIBBON together
Access, RIBBON, Blinking
and PAPER together
* This light goes off when the connection is complete.
Printer status
Power ON
Power OFF
Connected to a Wait for a while. Do not disconnect
digital camera, or the digital camera or PC.
the printer is
cooling off
Communicating
Printing
Out of paper Load paper into the paper-cassette.
End of ink Replace the ribbon cartridge with a
ribbon new one.
No ribbon Set a ribbon cartridge into the printer.
cartridge is set
Paper jam Remove jammed paper.
Communication Check whether the digital camera
error supports PictBridge.
Turn the printer off and on, then try
printing again. If the error persists,
contact your dealer.
Internal problem Contact your dealer.
Error signals
Solution
–
–
Page(s)
18
–
–
22, 32
19, 32
19
36
–
–
–
EN-33