Navigate Through The Menu - Bosch INTEGRUS Installation And Operating Manual

| en
32
2.4.2

Navigate through the menu

Operating the menu is always a sequence of alternating turns and pushes:
Turn the button to:
N
Cycle through the menu items within a menu (the menu item number and title on the first line is blinking).
N
Go to a settable option within a menu item (a blinking cursor moves through the menu screen).
N
Cycle through the available values for a settable option (the value is blinking).
Push the button to:
N
Confirm a chosen menu item (the menu item number and title stops blinking, a blinking cursor appears).
N
Go to a sub-menu (the sub-menu item character starts blinking).
N
Confirm the selection of a settable option (the cursor disappears, the option value starts blinking).
N
Confirm a selected value for a settable option (the value stops blinking, the cursor appears again).
After 5 minutes of inactivity, the display automatically switches back to the first item of the Main menu (Transmitter Status).
Each menu item is identified by a number (for the Main menu) or by a number plus a character (for the sub-menus). The item
identification can be found at the start of the first line and is used to navigate to and from sub-menus.
Most menu items have one or more settable configuration options. The value of an option can be changed by selecting a value
from a list of available values.
main menu
item number
4C Ch. Quality
Per Channel
Figure 2.13 menu item screen elements
To navigate through the Main menu:
1. Turn the button to move through the Main menu items. The item number and title starts blinking. (The first item,
Transmitter Status, doesn't blink.)
To jump to a sub-menu:
1. Navigate in the Main menu to an item with three dots (e.g. 'Setup ...').
2. Push the button to go to the sub menu. The sub-menu item character and title starts blinking.
: To enter the Setup sub-menu, push and hold the button for at least 3 seconds..
To navigate through a sub-menu:
1. Turn the button to move the cursor to the sub-menu item character.
2. Push the button. The item character and title starts blinking.
3. Turn to select another sub-menu item character.
4. Push to confirm the selection.
To change option values
1. Navigate to the applicable menu item.
2. Turn the button to move the cursor to the option value you want to change.
3. Push the button to activate the option. The option value starts to blink.
4. Turn the button to select a new option value.
5. Push the button to confirm the new value. The option value stops blinking.
6. Turn the button to move the cursor to another settable option (when available) and repeat steps 3 to 5.
BOSCH Security Systems B.V.| February 2003
INTEGRUS | Digital Infra-red Language Distribution System
menu item title
sub-menu
item character
three dots indicate
that the item has a
...
sub-menu
4C Channel 12
Stereo PQ In 03
option values