Examples - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Digital Infra-red Language Distribution System
To jump back from a sub-menu to an item of the Main menu:
1. Turn the button to move the cursor to the Main menu item number.
2. Push the button. The item number and title starts blinking.
3. Turn to select another item number.
4. Push to confirm the selection.
When you are turning counter-clockwise through sub-menu items, the display jumps automatically to the Main menu after you
have reached the first item (A) of the sub-menu. Example:
4B Nr. of Ch.
32 Channels
2.4.3

Examples

Each step in the examples below shows the text on the display and the action to go to the next step. Highlighted text (text)
indicates that the text is blinking. An underscore ( _ ) indicates the position of the cursor. Each example starts at the
Transmitter Status screen.
Example 1: Disable carrier 2. (See also section 2.5.10.)
Transmitter
32 Channels
4 Setup ...
4A Transmission
On
4F C.Settings...
4F Carrier 0
Enabled
4F Carrier 2
Enabled
4F Carrier 2
Enabled
4A Transmission
On
1. Turn the button to select the
'Setup' item (4) in the Main
menu.
2. Push and hold the button for
3 seconds to go to the 'Setup'
sub-menu.
3. Turn to select the 'C.Settings'
sub-menu item (4F).
4. Push to go to the 'C.Settings'
sub-menu.
5. Turn to select carrier 2.
6. Push to confirm.
7. Turn to move the cursor to
the second line.
4 Setup ...
4F Carrier 2
Enabled
4F Carrier 2
Enabled
4F Carrier 2
Disabled
4F Carrier 2
Disabled
4F Carrier 2
Disabled
4 Setup ...
Transmitter
32 Channels
BOSCH Security Systems | February 2003
en |
3 Enquiry ...
8. Push to confirm.
9. Turn to select 'Disabled'.
10. Push to confirm.
11. Turn to move the cursor to
the Main menu item number
(4).
12. Push to confirm.
13. Turn to select the Transmitter
Status screen.
14. Ready.
33