Basic Operations; Power On; Power Off (Standby State); Vol (Volume) - Fujitsu Aviamo P37FT05AEB User Manual

BASIC OPERATIONS

Power ON

1
Press /I to the ON
The power lamp lights up. (See P. E-7.)
2
Press .
The power is turned on, and the power lamp changes
from "Red" to "Green."
Select the Video, RGB, or TV mode to
enable ordinary operation.

Power OFF (Standby State)

1
Press
The power lamp changes from "Green" to "Red" and
the display becomes the standby state.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use.
E-18
state.
when the power is "ON".

VOL (Volume)

O
Press to increase the volume.
P
Press to reduce the volume.
When the volume adjustment button is
pressed
* Note that the volume level remains stored even when
you turn OFF the power.
* Volume menu will not be displayed when "No Audio"
is selected. (See P. E-36.)
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.

MUTE

K
Press .
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing
P
or .
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.
O