Table of Contents
Advertisement
Sleep timer operation (Using the main unit only)
The sleep timer automatically switches off the power after a preset time
has elapsed. There are 5 time periods available: 15, 30, 45, 60 and 90
minutes.
In "MENU ON" status:
Press [SOUND] repeatedly to select the desired sleep time. The selected
time (eg. SLP 15) appears on the display. After several seconds, the
"MENU ON" status returns and the sleep timer is set.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
Power does not come on.
The primary power switch [ON/OFF] on the subwoofer is OFF.
Set the primary power switch [ON/OFF] to ON.
Colour blur occurs on the TV screen.
The subwoofer is close to the TV.
Keep enough distance between the subwoofer and the TV so as
not to garble the TV screen.
Cleaning the cabinet
Use a clean soft cloth moistened with plain lukewarm water and wrung dry. Never use benzol, benzene or other strong chemical cleaners since these
could damage the finish of your unit. It is important that no liquid reaches the inside of the unit.
To check the remaining sleep time
Press [SOUND] once. After several seconds, the "MENU ON" status
returns.
To release the sleep timer while in operation
Press [SOUND] repeatedly until "OFF" appears, then press [FUNCTION]
to exit "MENU ON" status. The timer is also released if the power is
switched off.
TROUBLESHOOTING
SYMPTOM
Remote control does not work properly during operating the amplifier
controls.
MAINTENANCE
POSSIBLE CAUSE
CORRECTIVE ACTION
The remote control is not pointed at the remote sensor of the centre
speaker.
Point the remote control at the remote sensor of the centre
speaker.
The IR signal lead of the centre speaker is not connected.
Connect the IR signal lead to the REMOTE SENSOR IN socket
on the subwoofer.
8
Advertisement
Table of Contents
