Advertisement
MAIN DIAGRAM
In Use
Indicator
Wall mount
hook
MUTE
button
Handset
Support
Bracket
Battery
Compartment
Coil Cord
Jack
Ringer
Volume
Switch
One-touch
button (VIP) DEL button
DIAL button
LCD Display
New Call
Indicator
Speaker
button
Redial/Pause
button
button
R button
Power
Line Socket
Socket
TROUBLESHOOTING
If you have problems with your phone, please check below
for helpful hints:
BLANK OR
Check the line cord. Connect the telephone cord. Check
l
FAINT
batteries, Check adaptor.
SCREEN
CALLER ID
Call your telephone company to verify that your Caller ID
l
WILL NOT
services are active.
WORK
PROPERLY
You may have too many communication devices hooked
l
PHONE
to a single line. A communication device can be a phone,
WILL NOT
modem or facsimile (FAX) machine. Contact
RING
telephone company for help in calculating the limit for
your residence or business line.
l
Verify that the line cord is plugged in correctly.
NO DIAL
Verify that the line cord connection is correct and tightly
TONE
l
secured.
l
Call your telephone company to verify that your caller ID
NO DATA
services are active.
SENT
If you have an answering machine connected to this
l
Phone, ensure that your answering machine is set to
answer after at least two rings.
You answer the call before two rings.
l
Contact your telephone company if the problem
l
continues for more than 24 hours. The telephone
company may be experiencing temporary disconnection.
l
If you have experienced a power failure when using
NO RE-
optional AC adaptor, the batteries for memory back up
SPONSE ON
could become weak or dead. If the power is restored and
LCD DISPLAY
the display screen does not respond then You must
replace the batteries with new ones.
16
your
Advertisement
