Advertisement
6. Pause Function
Allows you to insert a temporary pause during dialling sequence. For
example, dialling an international number (e.g.: 011-886-22-795-1234),
some telephone company systems will not register the entire number
entry without a pause between the prefix numbers. You may have to
dial 011-
RD/P
dial 886 -
RD/P
. This allows adequate timing for the
phone number to register with the telephone company's system and
complete the call.
7. Mute Function
If you wish to speak privately to someone else in the room without
your caller overhearing, just press the
will display
MUTE
. To resume normal conversation, just press the
MUTE
button once again.
8. DEL Button
When the number you want to remove displayed on the LCD, press
the
DEL
button, the LCD will show "
to remove this number.
When your Caller ID phone is in use mode, you can press the
button once to stop the timer, press it once more to restart it. Also the
timer can start after dialling out the call about 10 seconds and stop
when hanging up.
9. Phonebook Button
Press the
button to enter the phone book directly. Refer to
"
FUNCTION OPERATIONS
", section "
MUTE
button once and the LCD
DEL?"
, press the
DEL
button again
PHONE BOOK
".
5
4. LANGUAGES SELECTING
The unit support multi languages, including
Australian,
German, Polish, Swedish, Danish, Finnish
Press the
DIAL
the language setting. Use
the
DIAL
button to confirm and exit.
5. AREA & LONG DISTANCE CODE SETTING
(Only under "English1", "English2", "Greek", "Austral", "Czech", "Slovak"
and "Turkish" language and in on-hook state, the setting can be done.)
When you use this phone for the first time, or move to an area that has
different area code, you must enter your area code. This is necessary
because the phone must distinguish local or long distance calls to
properly dial calls from the Caller ID list.
1.
Press the
enter the setting.
s
2.
Press
3.
Press the
DEL
4.
When the area code setting has been completed, press the
button to confirm and the LCD displays
enters the long distance code setting.
5.
Repeat the step 2 3 to finish the setting for LDS code and press
the
DEL
6. FLASHING TIME SETTING
Press the
DIAL
FLASH
and then the current value will display.
s
Use the
600ms). Press the
Czech, Slovak, Turkish,
English2, Spanish, Dutch, French,
and
button when the LCD shows
s
t
or
button to select the language. Press
DIAL
button when the LCD shows
t
or
button to select the correct digit.
DIAL
button to confirm and enter the next digit setting.
~
button to exit.
button to enter this setting when the LCD shows
or t
button to set the flash time (100ms/120ms/300ms/
DIAL
button to confirm and exit.
10
English1, Greek,
Norwegian
.
SET LANGUAGE
to enter
SET AREA & LDS
to
DIAL
SET LDS CODE
. The unit
SET
Advertisement
