Turning Power On/Off; Turning On The Power; Turning Off The Power - Epson Disc Producer PP-100 User Manual

Turning Power On/Off

This section describes how to turn the power on and off.

Turning On the Power

1
Connect the power cord.
2
Press the power button.
The Power light flashes green, then stays on.

Turning Off the Power

Press the power button until the Power light flashes.
The Power light flashes in green then goes off; then the power is turned off.
 The fan may continue to operate after the power is turned off, but it will automatically
stop after 15 minutes.
 The product may not be recognized by the PC when the power is turned back on while
fan is operating. In this case, disconnect the USB cable and connect it again.
 If the product is operating, wait for 10 seconds after operation is stopped; then turn off
the power.
Basic Operations
19