Table of Contents
Advertisement
MT A
6.5.1 Set Function Code
CPU32Diag>MT A [new value]
MT A allows the user to select the function code in most of the memory tests. The exceptions to
this are Program Test and TAS Test.
EXAMPLE
If the user supplied the optional new value, then the display appears as follows:
CPU32Diag>MT A [new value]<CR>
Function Code=<new value>
CPU32Diag>
If a new value was not specified by the user, then the old value is displayed all and the
user is allowed to enter a new value.
The default is Function Code=5, which is for on-board RAM.
CPU32Diag>MT A<CR>
Function Code=<current value> ?[new value]< CR>
Function Code=<new value>
CPU32Diag>
This command may be used to display the current value without changing it by pressing a
carriage return <CR> without entering the new value.
CPU32Diag>MT A<CR>
Function Code=<current value> ?<CR>
Function Code=<current value>
CPU32Diag>
M68CPU32BUG/D REV 1
Set Function Code
NOTE
6-13
DIAGNOSTIC FIRMWARE GUIDE
MT A
Advertisement
Table of Contents
