Overview of Publishing Modes
To write data to CDs/DVDs/BDs and to print labels that you created/edited are called
"Publish" in EPSON Total Disc Maker. The product has three kinds of publishing modes.
Standard Mode
This mode uses stacker 1 as the input stacker, and stacker 2 or 3 as the output stacker.
When stacker 2 is selected as the output stacker, up to 50 CDs/DVDs/BDs can be created
at once. Also, if you refill discs in the input stacker and take out published discs from the
output stacker at the same time, up to 1000 CDs/DVDs/BDs can be published in a single
job.
& See "Standard Mode" on page 29.
Low-Volume Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 3 as the output stacker.
Different types of discs (CD, DVD, and BD) can be loaded into each of the 2 stackers and
can create different types of discs. This is ideal for creating small batches of discs at once.
If the same type of discs are loaded into stacker 1 and 2 and Auto is selected for the input
stacker setting, up to 100 CDs/DVDs/BDs can be continuously published by taking out
published discs without refilling discs.
Up to 1000 CDs/DVDs/BDs can be continuously published in a single job by refilling discs
and taking out published discs.
& See "Low-Volume Mode" on page 41
Drive Settings
Number of write retries
Select 0 to 9 for the Number of write retries.
The Number of write retries is a setting to retry writing if a write error occurs.
Setting the Number of write retries will enable the job to continue without pausing if a write
error occurrs.
24
Publishing Discs