Overview Of Publish Modes - Epson C11C672001 User Manual

Overview of Publish Modes

Writing data to discs, printing labels that you created/edited, and reading data from discs
are called "Publish" in EPSON Total Disc Maker. The product has four kinds of publish
modes.
Standard Mode
This mode uses stacker 1 as the input stacker, and stacker 2, 3, or 4 as the output stacker.
When stacker 2 or 3 is selected as the output stacker, up to 50 CDs/DVDs/BDs can be
created at once. Also, if you refill discs in the input stacker and take out published discs
from the output stacker at the same time, up to 1000 CDs/DVDs/BDs can be published in
a single job.
If stacker 4 is selected as the output stacker, discs can be removed without stopping the
product while running a job.
& See "Standard Mode" on page 33.
External Output Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 3 or 4 as the output
stacker.
Different types of discs (CD, DVD, or BD) can be loaded into each of the 2 stackers and
can create different types of discs. This is ideal for creating small batches of discs at once.
If the same type of discs are loaded into stacker 1 and 2 and Auto is selected for the input
stacker setting, up to 100 CDs/DVDs/BDs can be continuously published by taking out
published discs without refilling discs.
Up to 1000 CDs/DVDs/BDs can be continuously published in a single job by refilling discs
and taking out published discs.
If stacker 4 is selected as the output stacker, discs can be removed without stopping the
product while running a job.
Note:
This mode does not use stacker 3 if you select stacker 4 as the output stacker.
& See "External Output Mode" on page 46.
26
Publishing Discs