Error Discs; Precautions For Duplicating Discs - Epson C11C672001 User Manual

Error Discs

Discs with write/read error will be ejected to different stackers depending on the output
stacker.
❏ When stacker 2 is set as the output stacker:
Ejected to stacker 3 (when stacker 3 is used) or stacker 4 (when stacker 3 is not used).
❏ When stacker 3 is set as the output stacker:
Ejected to stacker 3.
❏ When stacker 4 is set as the output stacker:
Ejected to stacker 4.
Note:
You can print an error mark on any disc with a write error to identify error discs.
& See "Failure error mark" on page 28.

Precautions for Duplicating Discs

❏ Please use a CD/DVD drive that supports MMC 4.0-compatible commands and
operates in conformity with MMC 4.0 as a source drive for copying. (Please check the
Epson website for a list of drives for which operation has been verified.)
❏ Please use a BD drive that supports MMC 5.0-compatible commands and operates in
conformity with MMC 5.0 as a source drive for copying. (Please check the Epson
website for a list of drives for which operation has been verified.)
❏ Copying CDs/DVDs/BDs may not be possible depending on the type of CD/DVD/BD
source drive used. If problems occur, please try using a different CD/DVD/BD source
drive for copying.
❏ If the source disc is a multi-session CD/DVD/BD, it cannot be copied.
❏ If the source disc is a packet-written CD, it cannot be copied.
31
Publishing Discs