Brother MFC-J650DW Advanced User's Manual page 54

Chapter 7
NOTE
• 2in1(ID), Poster, Book Copy
Fit to Page are not available with
2-sided Copy.
• You can use only A4, A5 or Letter size
plain paper.
1
MFC-J870DW only
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
If you want to sort multiple copies, press
a or b to display Stack/Sort.
f
Press Stack/Sort.
g
Press Sort.
h
Press a or b to display 2-sided Copy.
i
Press 2-sided Copy.
j
Press a or b to display the 2-sided copy
type you want, and press
Portrait Long Edge Flip,
Landscape Long Edge Flip,
Portrait Short Edge Flip or
Landscape Short Edge Flip.
k
(DCP-J752DW, MFC-J650DW and
MFC-J870DW)
Read and review the message on the
Touchscreen, and then press OK.
l
Review your settings on the
Touchscreen, and then press OK.
48
m
Press Mono Start or Colour Start.
If you placed the document in the ADF
1
and
the machine scans the document and
starts printing.
1
If you are using the scanner glass, go
to step n.
n
The Touchscreen shows:
Turn over the document
(or Flip the book), then
press [Scan]. When you
finish, press [Complete].
Place the next page on the scanner
glass and press Scan.
Press OK.
The machine starts printing.
o
If you pressed Sort for multiple copies,
repeat step n for each page. After all
the pages have been scanned, press
Complete.
The machine starts printing.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
NOTE
If your document causes paper jams, try
using one of the special 2-sided copy
settings. Press Advanced after step i,
and then choose 2-sided 1 or
2-sided 2.
2-sided 1 helps avoid paper jams when
copying by allowing more time for the ink
to dry. Choosing 2-sided 2 allows more
time for the ink to dry while also using less
ink.
DCP-J752DW, MFC-J650DW and
MFC-J870DW only
1
,