Toshiba E-studio5540c Safety Information Manual page 11

Except the U.S.A. and Canada
e-STUDIO5540C/6540C/6550C
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993, IEC60825-1:2007 including
amendments.
The unit uses laser diodes with a max. output of 13.3 mW, a wavelength of 788 nm at a continuous pulse.
e-STUDIO2040C/2540C/3040C/3540C/4540C
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993, IEC60825-1:2007 including
amendments.
The unit uses laser diodes with a max. output of 30 mW, a wavelength of 790 nm at a continuous pulse.
e-STUDIO206L/256/306/356/456, e-STUDIO256SE/306SE/356SE/456SE, e-STUDIO506/506SE
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993, IEC60825-1:2007 including
amendments.
The unit uses laser diodes with a max. output of 10 mW, a wavelength of 785 or 793 nm at a continuous pulse.
e-STUDIO556/656/756/856, e-STUDIO556SE/656SE/756SE/856SE
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993, IEC60825-1:2007 including
amendments.
The unit uses laser diodes with a max. output of 15 mW, a wavelength of 788 or 793 nm at a continuous pulse.
Caution:
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
For the EU only
Working environment
From EMC (Electromagnetic Compatibility) point of view, the operation of this product is being restricted in following
environments:
Medical Environments: This product is not certified as a medical product according to the Medical Product
Directive 93/42/EEC.
Domestic environments (e.g. a private living room with TV / Radio sets in the nearby surrounding area) because
this is a so called EMC class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures!
Any consequences resulting from the use of this product in restricted working environments are not the responsibility
of TOSHIBA TEC.
The consequences of the use of this product in restricted working environments may be an electromagnetic
interference with other devices or machines in the nearby surrounding area. This can result into malfunction
including data loss / data error pertaining to this product or the other devices / machines involved in the
electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not
permitted.
CE compliance
This product is labelled with the CE mark in accordance with the provisions of the applicable European Directives,
notably the Low Voltage Directive 2006/95/EC, the Electromagnetic Compatibility Directive 2004/108/EC, the RoHS
Directive 2011/65/EU for this product and the electric accessories, the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC for the telecommunication accessories.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-Str. 7,
41460 Neuss, Germany, phone +49-(0)-2131-1245-0.
For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC.
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Notice to Users 9