Toshiba E-studio5540c Safety Information Manual page 23

1.GENERAL PRECAUTIONS
When removing the plug from the outlet, do not pull the power cord. Always hold the plug when
removing it from the outlet. If the power cord is pulled, the wires may break and this could cause a fire or
give you an electric shock.
Make sure that the ventilation holes are not blocked.
If the temperature within the Multifunctional Digital Systems becomes too high, a fire could result.
e-STUDIO5540C/6540C/6550C, e-STUDIO556/656/756/856, and e-STUDIO556SE/656SE/756SE/856SE
There are 4 adjusters (stoppers) at the bottom of the equipment (2 in the rear, 2 in the front). After
moving/installing the equipment, be sure to turn and lower the adjusters, and then fix them firmly on the
floor.
Before moving the equipment, turn and raise the adjusters.
e-STUDIO5540C/6540C/6550C
e-STUDIO2040C/2540C/3040C/3540C/4540C
The Paper Feed Pedestal (optional) has 4 antiskid devices and 2 fall-preventing stoppers on the bottom.
When moving this equipment, turn them in the direction of arrows (see figures below) and raise them to
unfix the equipment. After it has been moved, be sure to turn them in the opposite direction and lower
them to fix it.
e-STUDIO556/656/756/856,
e-STUDIO556SE/656SE/756SE/856SE
General Precautions 21